|
|
Engine Data - 1.3L/60 PS
| Description | |
|---|
| Engine code |
BAA |
| Bore |
73.95 mm |
| Stroke |
75.48 mm |
| Cubic capacity |
1297 cc |
| Compression ratio |
10.2 : 1 |
| Power output at 5500 rpm |
44 kW (60 PS) |
| Torque at 2500 rpm |
99 Nm |
| Max. engine speed (intermittent) |
6175 rpm |
| Max. engine speed (continuous) |
5950 rpm |
| Idle speed |
750 rpm |
| Number of main bearings |
5 |
| Camshaft drive |
Chain |
| Maximum oil consumption |
0.5L/1000 km |
Engine Data - 1.3L/70 PS
| Description | |
|---|
| Engine code |
A9A/A9B |
| Bore |
73.95 mm |
| Stroke |
75.48 mm |
| Cubic capacity |
1297 cc |
| Compression ratio |
10.2 : 1 |
| Power output at 5500 rpm |
51 kW (70 PS) |
| Torque at 2800 rpm |
108 Nm |
| Max. engine speed (intermittent) |
6175 rpm |
| Max. engine speed (continuous) |
5950 rpm |
| Idle speed |
750 rpm |
| Number of main bearings |
5 |
| Camshaft drive |
Chain |
| Maximum oil consumption |
0.5L/1000 km |
Engine Data - 1.6L/95 PS
| Description | |
|---|
| Engine code |
CDB/CDC |
| Engine code - Vehicles with convertible top |
CDRA/CDRB |
| Bore |
82.07 mm |
| Stroke |
75.48 mm |
| Cubic capacity |
1597 cc |
| Compression ratio |
9.5 : 1 |
| Power output at 5500 rpm |
70 kW (95 PS) |
| Torque at 2500 rpm |
134 Nm |
| Max. engine speed (intermittent) |
6175 rpm |
| Max. engine speed (continuous) |
5950 rpm |
| Idle speed |
880 rpm |
| Number of main bearings |
5 |
| Camshaft drive |
Chain |
| Maximum oil consumption |
0.5L/1000 km |
Engine Oil
| Viscosity | Specification |
|---|
| Engine oil |
| SAE 5W-20 |
WSS-M2C948-B |
| SAE 5W-30 |
WSS-M2C913-C |
| Alternative engine oils (for top-up only) |
| SAE 5W-30 |
ACEA A5/B5 |
Lubricants, Fluids, Sealers and Adhesives
| Item | Specification |
|---|
| Sealant |
WSK-M2G349-A4 |
| Sealant |
WSEM-4G323-A4 |
| High-temperature grease |
WSD-M1C230-A |
Capacities
| | Litres |
|---|
| Engine oil, initial fill including filter |
4.45 |
| Engine oil, including filter change |
4.10 |
| Engine oil, excluding filter change |
3.70 |
Oil System
| Description | bar |
|---|
| Pressure relief valve opening pressure |
5.0 - 6.0 |
Valves - 1.3L
| Description | mm |
|---|
| Valve spring free length |
43.20 |
| Valve spring inner diameter (intake and exhaust) |
18.80 - 19.20 |
| Valve spring material diameter |
3.70 |
| Number of valve spring coils |
6.70 |
| Valve (intake) overall length |
109.37 - 109.83 |
| Valve (exhaust) overall length |
109.68 - 110.05 |
| Valve head (intake) diameter |
34.97 - 35.23 |
| Valve head (exhaust) diameter |
29.57 - 29.83 |
| Valve stem diameter (intake and exhaust) |
5.957 - 5.975 |
| Valve stem to valve guide clearance (intake and exhaust) |
0.025 - 0.073 |
| Valve lift (intake and exhaust) |
9.74 |
Valves - 1.6L
| Description | mm |
|---|
| Valve spring free length |
43.20 |
| Valve spring inner diameter (intake and exhaust) |
18.80 - 19.20 |
| Valve spring material diameter |
3.70 |
| Number of valve spring coils |
6.70 |
| Valve (intake) overall length |
109.37 - 109.83 |
| Valve (exhaust) overall length |
109.68 - 110.05 |
| Valve head (intake) diameter |
39.87 - 40.13 |
| Valve head (exhaust) diameter |
33.87 - 34.13 |
| Valve stem diameter (intake and exhaust) |
5.967 - 5.985 |
| Valve stem to valve guide clearance (intake and exhaust) |
0.015 - 0.053 |
| Valve lift (intake and exhaust) |
9.74 |
Camshaft
| Description | mm |
|---|
| Valve lift cam (intake and exhaust) |
9.74 |
| Camshaft bearing journal diameter |
23.96 - 23.98 |
| Camshaft bearing journal bore diameter |
24.00 - 24.03 |
| Camshaft end float |
0.075 - 0.185 |
Valve Timing - 1.3L
| Description | Degrees |
|---|
| Valve timing, intake opens (1 mm lift) after TDC |
14 |
| Valve timing, intake closes (1 mm lift) after BDC |
26 |
| Valve timing, exhaust opens (1 mm lift) before BDC |
26 |
| Valve timing, exhaust closes (1 mm lift) before TDC |
14 |
Valve Timing - 1.6L
| Description | Degrees |
|---|
| Valve timing, intake opens (1 mm lift) after TDC |
12 |
| Valve timing, intake closes (1 mm lift) after BDC |
24 |
| Valve timing, exhaust opens (1 mm lift) before BDC |
24 |
| Valve timing, exhaust closes (1 mm lift) before TDC |
12 |
Crankshaft
| Description | mm |
|---|
| Crankshaft main bearing journal diameter (standard) |
56.980 - 57.00 |
| Crankshaft main bearing journal diameter (undersize) |
56.726 - 56.746 |
| Crankshaft main bearing journal shell width |
18.290 - 18.690 |
| Crankshaft connecting rod journal diameter (standard) |
40.990 - 41.010 |
| Crankshaft connecting rod journal diameter (undersize) |
40.740 - 40.760 |
| Crankshaft connecting rod journal diameter (service 0.508) |
40.490 - 40.510 |
| Crankshaft connecting rod journal diameter (service 0.762) |
40.240 - 40.260 |
| Crankshaft end play |
0.075 - 0.285 |
| Crankshaft thrust washer thickness (standard) |
2.800 - 2.850 |
| Crankshaft thrust washer thickness (oversize) |
2.99 - 3.040 |
NOTICE: The crankshaft must not be machined.
Pistons - 1.3L
| Description | mm |
|---|
| Piston diameter, class 1 |
73.917 - 73.932 |
| Piston diameter (oversize 0.15 mm) |
74.067 - 74.082 |
| Piston diameter (oversize 0.50 mm) |
74.417 - 74.432 |
| Piston to cylinder bore clearance |
0.020 - 0.050 |
| Piston ring end gap (installed) (top) |
0.20 - 0.40 |
| Piston ring end gap (installed) second |
0.25 - 0.50 |
| Piston ring end gap (installed) oil |
0.25 - 0.75 |
| Piston ring-to-groove clearance (top) |
0.020 - 0.055 |
| Piston ring-to-groove clearance (second) |
0.030 - 0.060 |
| Piston ring end gap position, top |
120 degrees offset from second ring end gap |
| Piston ring end gap position, second |
Aligned with piston pin |
| Piston ring end gap position, oil |
120 degrees offset from second ring end gap* |
| Piston pin length |
51.700 - 52.000 |
| Piston pin diameter |
18.030 - 18.034 |
| Piston pin to bore diameter interference |
0.012 - 0.036 |
| Piston pin slide clearance (21°C) |
0.012 - 0.020 |
*) Rails and expander 120 degrees.
Pistons - 1.6L
| Description | |
|---|
| Piston diameter, class 1 |
82.035 - 82.050 mm |
| Piston diameter (oversize 0.15 mm) |
82.185 - 82.200 mm |
| Piston diameter (oversize 0.50 mm) |
82.535 - 82.550 mm |
| Piston to cylinder bore clearance |
0.020 - 0.050 mm |
| Piston ring end gap (installed) (top) |
0.20 - 0.40 mm |
| Piston ring end gap (installed) second |
0.25 - 0.50 mm |
| Piston ring end gap (installed) oil |
0.25 - 1.0 mm |
| Piston ring-to-groove clearance (top) |
0.040 - 0.075 mm |
| Piston ring-to-groove clearance (second) |
0.030 - 0.070 mm |
| Piston ring end gap position, top |
120 degrees offset from second ring end gap |
| Piston ring end gap position, second |
Aligned with piston pin |
| Piston ring end gap position, oil |
120 degrees offset from second ring end gap* |
| Piston pin length |
53.300 - 53.600 mm |
| Piston pin diameter |
18.030 - 18.034 mm |
| Piston pin to connecting rod small end diameter, interference |
0.012 - 0.036 mm |
| Piston pin to pin bore clearance (21°C) |
0.012 - 0.020 mm |
*) Rails and expander 120 degrees.
Connecting Rods
| Description | mm |
|---|
| Connecting rod large end bore diameter |
43.99 - 44.01 |
| Connecting rod small end bore diameter |
17.998 - 18.018 |
| Connecting rod bearing shell, vertical inner diameter, standard |
41.016 - 41.050 |
| Connecting rod bearing shell, vertical inner diameter, undersize 0.254 mm |
40.966 - 41.000 |
| Connecting rod bearing shell, vertical inner diameter, undersize 0.508 mm |
40.516 - 40.550 |
| Connecting rod bearing shell, vertical inner diameter, undersize 0.762 mm |
40.226 - 40.300 |
| Connecting rod bearing shell, vertical inner diameter, undersize 1.016 mm |
40.016 - 40.050 |
| Connecting rod bearing clearance (radial) |
0.006 - 0.026 |
| Connecting rod bearing clearance (axial) |
0.100 - 0.250 |
Cylinder Head
| Description | mm |
|---|
| Maximum distortion |
0.02 |
Cylinder Block - 1.3L
| Description | mm |
|---|
| Cylinder bore diameter, standard |
73.9525 - 73.9675 |
| Cylinder bore diameter (oversize 0.15) |
74.1025 - 74.1175 |
| Cylinder bore diameter (oversize 0.50) |
74.4525 - 74.4675 |
| Center main bearing width (without thrust half-rings |
22.040 - 22.100 |
| Main bearing shells, vertical inner diameter (installed), standard |
57.009 - 57.036 |
| Main bearing shells, vertical inner diameter (installed), undersize 0.25 mm |
56.755 - 56.782 |
| Main bearing shells, vertical inner diameter (installed), undersize 0.508 mm |
56.509 - 56.528 |
| Main bearing shells, vertical inner diameter (installed), undersize 0.762 mm |
56.247 - 56.274 |
| Main bearing parent bore diameter, standard |
60.623 - 60.636 |
| Main bearing parent bore diameter, oversize |
61.003 - 61.016 |
Cylinder Block - 1.6L
| Description | mm |
|---|
| Cylinder bore diameter, standard |
82.0775 - 82.085 |
| Cylinder bore diameter (oversize 0.15) |
82.2275 - 82.235 |
| Cylinder bore diameter (oversize 0.50) |
82.5775 - 82.585 |
| Center main bearing width (without thrust half-rings |
22.040 - 22.100 |
| Main bearing shells, vertical inner diameter (installed), standard |
57.009 - 57.036 |
| Main bearing shells, vertical inner diameter (installed), undersize 0.25 mm |
56.755 - 56.782 |
| Main bearing shells, vertical inner diameter (installed), undersize 0.508 mm |
56.509 - 56.528 |
| Main bearing shells, vertical inner diameter (installed), undersize 0.762 mm |
56.247 - 56.274 |
| Main bearing parent bore diameter, standard |
60.623 - 60.636 |
| Main bearing parent bore diameter, oversize |
61.003 - 61.016 |
Torque Specifications
| Description | Nm | lb-ft | lb-in |
|---|
| Oil gallery plug, 1/2" |
22 |
16 |
- |
| Crankshaft main bearing retaining bolts |
95 |
70 |
- |
| Crankshaft rear oil seal retainer retaining bolts |
10 |
- |
89 |
| Crankshaft position (CKP) sensor retaining bolt |
10 |
- |
89 |
| Crankshaft pulley retaining bolt |
125 |
92 |
- |
| Connecting rod retaining bolts |
a |
- |
- |
| Hydraulic timing chain tensioner |
40 |
30 |
- |
| Timing chain tensioner arm retaining bolt |
26 |
19 |
- |
| Timing Chain guide retaining bolt |
26 |
19 |
- |
| Oil pump retaining bolts |
20 |
15 |
- |
| Oil pickup pipe retaining bolt |
10 |
- |
89 |
| Oil pan baffle retaining nuts |
19 |
14 |
- |
| Oil pan retaining bolts |
a |
- |
- |
| Oil filter adaptor |
20 |
15 |
- |
| Oil pressure switch |
20 |
15 |
- |
| Oil drain plug |
25 |
18 |
- |
| Oil level indicator tube retaining bolts |
20 |
15 |
- |
| Accessory drive belt idler pulley retaining bolt |
48 |
35 |
- |
| Coolant pump retaining bolts |
10 |
- |
89 |
| Coolant pump pulley retaining bolts |
12 |
9 |
- |
| Coolant expansion tank retaining bolt |
8 |
- |
71 |
| Power steering pump retaining bolts |
25 |
18 |
- |
| Power steering supply line retaining bracket retaining bolt |
20 |
20 |
- |
| Flywheel retaining bolts |
67 |
49 |
- |
| Air Conditioning (A/C) compressor retaining bolts |
25 |
18 |
- |
| Starter motor retaining bolts |
35 |
26 |
- |
| Battery tray support bracket retaining bolts |
25 |
18 |
- |
| Ground lead to side member retaining bolt |
15 |
11 |
- |
| Engine lifting eye |
20 |
15 |
- |
| Cylinder head bolts |
a |
- |
- |
| Camshaft sprocket retaining bolt |
75 |
55 |
- |
| Camshaft bearing cap retaining bolts |
9 |
- |
80 |
| Camshaft position (CMP) sensor retaining bolt |
5 |
- |
44 |
| Valve cover retaining bolts |
9 |
- |
80 |
| Ignition coil retaining bolts |
6 |
- |
53 |
| Coolant flow control housing retaining bolts |
10 |
- |
89 |
| Spark plug |
15 |
11 |
- |
| Intake manifold retaining nuts |
18 |
13 |
- |
| Intake manifold retaining bolts |
18 |
13 |
- |
| Exhaust manifold retaining nuts |
a |
- |
- |
| Exhaust manifold heat shield upper retaining bolts |
10 |
- |
89 |
| Exhaust manifold heat shield lower retaining bolts |
10 |
- |
89 |
| Engine front mount to engine front mount retaining bracket |
48 |
35 |
- |
| Engine front mount retaining bracket to cylinder head bolts |
25 |
18 |
- |
| Flexible exhaust pipe to exhaust manifold retaining nuts |
47 |
35 |
- |
| Engine rear mount center bolt |
90 |
66 |
- |
| Transaxle upper retaining bolt |
44 |
32 |
- |
| Transaxle lower retaining bolts |
44 |
32 |
- |
| Transaxle left-hand retaining bolt |
44 |
32 |
- |
| Transaxle right-hand retaining bolts |
44 |
32 |
- |
| Engine support insulator to crossmember retaining bolts |
48 |
35 |
- |
| Engine support insulator retaining bolt M10 |
70 |
52 |
- |
| Engine support insulator retaining bolt M12 |
120 |
89 |
- |
| Engine support insulator to transaxle retaining bolts |
48 |
35 |
- |
| Strut and spring assembly top mount retaining nuts |
25 |
18 |
- |
a) Refer to procedure in this section.
|
|
